I-gauge yobukhulu be-Ultrasonic TM210B
Izici
I-1.Ikwazi ukwenza izilinganiso ezintweni ezahlukahlukene, kufaka phakathi izinsimbi, ipulasitiki, izinto zobumba, izinhlanganisela, ama-epoxies, ingilazi nezinye izinto ze-wave ze-ultrasonic ezihamba kahle.
Amamodeli we-2.Transducer ayatholakala ngohlelo lokusebenza olukhethekile, kufaka phakathi okokusebenza okusanhlamvu okuluhlaza kanye nezicelo zokushisa okuphezulu.
Umsebenzi we-3.Probe-Zero, umsebenzi we-Sound-Veloctiy-Calibration.
4.Two-Point Samandla umsebenzi.
5.Coupling status Inkomba ebonisa isimo coupling.
Imininingwane 6.Ibhethri ikhombisa ukuphumula kwebhethri.
7.Auto ukulala namandla auto off umsebenzi ukonga impilo yebhethri.
Isoftware engu-8.Optional yokucubungula imininingwane yememori ku-PC.
9.Optional ezishisayo mini-iphrinta ukuphrinta idatha kulinganiswa nge-USB port.
Umsebenzi we-10.Adjust athole, kulula ukuhlola izinto zensimbi yensimbi
Imininingwane
| Khombisa | I-128 × 64 LCD ene-backlight ye-LED. |
| Ibanga lokulinganisa | 0.75mm ~ 300.0mm (0.03inch ~ 11.8 intshi) |
| Ijubane lomsindo | I-1000m / s ~ 9999m / s (0.039 ~ 0.394in / µs |
| Khombisa ukulungiswa | 0.01mm noma i-0.1mm (ngaphansi kuka-100.0mm) 0.1mm (ngaphezu kuka-99.99mm)
|
| Ukunemba | ± (0.5% Ubukhulu +0.02) mm, kuya ngezinto nezimo |
| Amayunithi | Umkhawulo ophansi wamapayipi wensimbi: Uphenyo lwe-5MHz: F20mm´3.0mm (F0.8´0.12 intshi) Uphenyo lwe-10MHz: F20mm´3.0mm (F0.6´0.08 intshi) |
| Umthombo Wamandla | 2pcs 1.5V usayizi we-AA, amabhethri. Amahora ayi-100 isikhathi esijwayelekile sokusebenza (ukukhanya kwangemuva kwe-LED kuvaliwe). |
| Ukuxhumana | Imbobo ye-serial ye-USB |
| Uhlaka Ubukhulu | 150mm × 74mm × 32mm |
| Isisindo | 238 g |
Ukufundwa kwezilinganiso ezine ngomzuzwana kusilinganiso sephoyinti elilodwa,
Imemori yamafayela angafika kwangu-5 (kufika kumanani ayi-100 efayelini ngalinye) yamanani agciniwe
Ukucushwa
| Cha | Into | Ubuningi | Qaphela | |
| Ukucushwa Okujwayelekile | 1 | Umzimba omkhulu | 1 | |
| 2 | I-Transducer | 1 | Imodeli: TM-08 | |
| 3 | Ukushada | 1 | ||
| 4 | Ithuluzi Lensimbi | 1 | ||
| 5 | Incwajana Yokusebenza | 1 | ||
| 6 | Ane-alikhali ibhethri | 2 | Usayizi we-AA | |
| 12 | Isoftware yeDathaPro | 1 | ||
| 13 | Ikhebula Lokuxhumana | 1 | ||
| UkhethoConfiguration | 7 | I-Transducer: N02 | Isithasiselo A | |
| 8 | I-Transducer: N07 | |||
| 9 | I-Transducer: I-HT5 | |||
| 10 | Iphrinta encane yokushisa | 1 | ||
| 11 | Phrinta ikhebula | 1 | ||
Hlanganisa ngokuzithandela i-gauge ye-ultrasonic gauge
| Imodeli | Freq. I-MHz | I-Diam. Ubuncane. | Ibanga lokulinganisa | Umkhawulo ophansi | Incazelo |
| TM-12 | 2 | 14 | 3.0mm-300.0mm (ngensimbi) | 20 | Okwezinto ezishubile, ezinqanda kakhulu, noma ezisakazeka kakhulu |
| TM-08 | 5 | 10 | 1.2mm-230.0mm (ngensimbi) | ￠ 20mm × 3.0mm | Isilinganiso esijwayelekile |
| TM-08/90 | 5 | 10 | 1.2mm-230.0mm (ngensimbi) | ￠ 20mm × 3.0mm | Isilinganiso esijwayelekile |
| TM-06 | 7 | 6 | 0.75mm-80.0mm (ngensimbi) | ￠ 15mm × 2.0mm | Okokulinganisa ipayipi elincanyana noma isilinganiso esincane sogqinsi lwamapayipi odonga |
| I-HT-5 | 5 | 2 | 3mm-200mm (ngensimbi) | 30 | Ngokwesilinganiso sokushisa okuphezulu (kufika ku-300 ℃) |
| I-HT5-2 | 5 | 2 | 3mm-200mm (ngensimbi) | 30 | Ngokwesilinganiso sokushisa okuphezulu (kufika ku-550 ℃) |
